The measuring amplifier GSV-15L is suitable for connection with strain gauges, such as force sensors, torque sensors or strain sensors.
The measuring amplifier stands out due to its very small dimensions of just 16 mm x 33 mm x 5 mm.
Despite the small dimensions, it has special functions such as automatic zero adjustment across 2 mV/V and automatic scaling of the current measured value to 10 volt output signal. The GSV-15L has a 24V digital control input for each of these functions.
The open collector threshold value output "SW" reacts when 90% of the programmed measuring range has been exceeded.
The integrated digital filter facilitates the formation of a stable, low-noise and zero point stable output signal especially at low frequencies from 5...105 Hz, and also at high amplifications of low input signals of 0.1 mV/V for example.
The resolution at the analogue output is 4096 parts.
The sampling frequency can also be set to 315 Hz or 1300 Hz in the factory.
The measuring amplifier can also be configured for the connection of acceleration sensors in the factory. The amplitude of the acceleration signal is then displayed at the output.
Versions are available with and without a header.
