The GSV-5A6 measuring amplifier is an amplifier with 6 independently configurable channels for sensors with strain gauges, such as force sensors, torque sensors, acceleration sensors or strain transducers.
Sensors are connected via a SubD44HD socket. Due to its compact dimensions and the SubD44HD socket, the measuring amplifier is ideal for connecting force/torque sensors and for mounting in the immediate vicinity of the sensor, e.g. on robot axis 3.
The output signals are connected to the SubD15 socket on the rear.
The power supply 10 V DC...28 Volt DC can be provided via the 4-pin M8 connector or via the SubD15 socket on the rear. There are also two digital inputs level 10...28V for zeroing all output signals for the shunt calibration.
The status after zeroing is permanently saved in an EEPROM of the measuring amplifier and is retained even after the voltage is interrupted.
This measuring amplifier is suitable for connecting bridge sensors from 120 Ohm to 5000 Ohm or full-bridge strain gauges. The connection is made using either 4- or 6-wire technology. The sensor lines can be left open.
The GSV-5A6 measuring amplifier is supplied with an 18 V power supply and cables suitable for the Sub-D sockets.
The GSV-5A6 is operated and set using 4 push buttons. The current status of the individual channels is shown by 14 LEDs. Locking is possible.
