The KD60a force sensor is the successor to the KD60 force sensor. It also has the geometry of a miniature load cell and is attached on one side via the through holes. The force is introduced into the M5 thread. The force is introduced parallel when loaded. The force sensor tolerates displacements of the force introduction and transverse forces due to its double-beam design.
The special feature of this model is, among other things, the selectable connection option: thanks to the integrated circuit board, the appropriate connection can be selected. You can choose either the solder contacts for a direct cable connection or a small IDC connector for a suitable connection cable.
The accuracy of 0.1 is already achieved with a characteristic value of 0.5 mV/V. This means that the zero point stability is tolerated more tightly by a factor of 4 compared to a sensor with a nominal characteristic value of 2 mV/V. The KD60a force sensor can be used with an output signal of up to 2 mV/V or up to four times the specified nominal force.
An high-temperature version (HT) for a maximum operating temperature of 150°C is available on request. This sensor is suitable for test benches with high continuous loads.
