The force is transmitted via the universal ball joint (diameter 2.4mm, R4) in the centre of the sensor.
The force sensor is assembled on a flat surface. The force sensor is centered on the outer circumference, for example with 3 pins or within a 0.5 mm deep sink. The 9.8mm – 7.4mm ring forms the sensor’s contact area. In the centre, a potting compound is visible up to a 7.4mm diameter. The inner ring is not used for centring.
To protect against lift-off, the contact area can be fixed on a flat surface with PUR lacquer.
A version with a central cable outlet is available as an alternative to a lateral cable outlet.
Cable type in this version is MESC-4x0014-PUR;
