Art.Nr.: 9059

TD175e 10Nm

type: torque sensor
nominal torque: 10 Nm
accuracy class: 0.1
dimensions: Ø 175 mm x 98 mm
internal pitch circle: 149 mm
internal bore: 108 mm
with integrated measuring amplifier GSV-1A 010/250/2 / M12, mounted on the TD175 torque sensor
analog output -10V ... + 10V
connection: M12 connector, mating connector with 5 m cable SAC-5P- 5,0-PUR / M12FS SH
material: aluminum alloy

incl. factory calibration certificate "System-calibration-5":

calibration of the measuring chain (torque sensor + measuring amplifier)
3 measuring series with 5 measuring points each
measurement of the span, the relative characteristic deviation and the relative linearity deviation
measurement of the insulation resistance, the sensor characteristic value, the zero deviation of the sensor
measurement of the zero point return error
proof of traceability to DAkkS
torque device
place a calibration mark on the device
right torque: 0% -25% -50% -75% -100% -0%
left torque: 0% -25% -50% -75% -100% -0%
measurement of the sensor characteristic value in mV/V and the characteristic value of the measuring chain
adjustment of display

All details

Product description

Datasheet

3D Models

Artikelbeschreibung

type: torque sensor
nominal torque: 10 Nm
accuracy class: 0.1
dimensions: Ø 175 mm x 98 mm
internal pitch circle: 149 mm
internal bore: 108 mm
with integrated measuring amplifier GSV-1A 010/250/2 / M12, mounted on the TD175 torque sensor
analog output -10V ... + 10V
connection: M12 connector, mating connector with 5 m cable SAC-5P- 5,0-PUR / M12FS SH
material: aluminum alloy

incl. factory calibration certificate "System-calibration-5":

calibration of the measuring chain (torque sensor + measuring amplifier)
3 measuring series with 5 measuring points each
measurement of the span, the relative characteristic deviation and the relative linearity deviation
measurement of the insulation resistance, the sensor characteristic value, the zero deviation of the sensor
measurement of the zero point return error
proof of traceability to DAkkS
torque device
place a calibration mark on the device
right torque: 0% -25% -50% -75% -100% -0%
left torque: 0% -25% -50% -75% -100% -0%
measurement of the sensor characteristic value in mV/V and the characteristic value of the measuring chain
adjustment of display

Highlights

with integrated measuring amplifier GSV-1A 010/250/2/M12
Due to the arrangement of the measuring spokes, bending moments of up to 200 Nm can be absorbed

Product description

The torque sensor TD175 is used in test benches for measuring the reaction torque. (Wired, non-rotating).
The torque sensor consists of two flanges, which are connected with each other via 4 measuring spokes. The two flanges have the same pitch circle Æ 149mm. The centerings are designed as an external and internal collar with Ø114,3.
Due to the large diameter of the torque sensor TD175 and the arrangement of the measuring spokes in the axial direction, this torque sensor can also absorb bending moments up to 200 Nm, which are caused by the dead weight of the drive motor.
The connection is made via a terminal box with M12 connectors.

We are ready to help

Request a special version

Didn't find what you were looking for?

Leave your details so we can contact you

TD175e 10Nm